Clear jams from the optional envelope feeder
This procedure applies only to jams that occur when you are using an optional envelope feeder.
| 1.
|
| Remove any envelopes that are loaded in the optional envelope feeder. Lower the envelope weight and lift the tray extension up, to the closed position.
|
|
| 2.
|
| Grasp both sides of the optional envelope feeder and carefully pull it out of the product.
|
|
| 3.
|
| Slowly remove any jammed envelopes from the optional envelope feeder and the product.
|
|
| 4.
|
| Reinstall the envelope feeder.
|
|
| 5.
|
| Press OK to clear the jam message.
|
|
| 6.
|
| If a jam message persists, an envelope is still jammed in the product. Look for the jam in another location. See Jam locations.
|
|
| 7.
|
| Replace the envelopes, making sure that you push the bottom envelopes in slightly further than the top envelopes.
|
|
HP Laserjet P4010 P4510 Clear jams from the optional envelope feeder