Print to the rear output bin
The product always prints to the rear output bin if it is open. Paper that is printed to this bin will exit face-up, with the last page on top (reverse order).
Printing from Tray 1 to the rear output bin provides the straightest path. Opening the rear output bin might improve performance with the following items:
| ●
|
|
| ●
|
|
| ●
|
|
| ●
|
|
| ●
|
| Paper heavier than 120 g/m2 (32 lb)
|
|
To open the rear output bin, grasp the handle at the top of the bin. Pull the bin down, and slide out the extension.
Opening the rear output bin makes the duplexer (if installed) and the top output bin unavailable. To avoid jams, do not open or close the rear output bin while the product is printing.
HP Laserjet P4010 P4510 Print to the rear output bin