Load Tray 2 or an optional 500-sheet tray

Load Tray 2 or an optional 500-sheet tray

HP Laserjet P4010 P4510 caution Load Tray 2 or an optional 500 sheet tray CAUTION:

To avoid jams, do not load trays while the product is printing.

HP Laserjet P4010 P4510 caution Load Tray 2 or an optional 500 sheet tray CAUTION:

Do not fan the paper. Fanning can cause misfeeds.

1.
Pull the tray out and lift up slightly to remove it from the product.

HP Laserjet P4010 P4510 ztu st13 Load Tray 2 or an optional 500 sheet tray

2.
Pinch the release that is located on the left guide and slide the side guides to the correct paper size.

HP Laserjet P4010 P4510 ztu st07 Load Tray 2 or an optional 500 sheet tray

3.
Pinch the release that is located on the rear paper guide and slide it to the correct paper size.

HP Laserjet P4010 P4510 ztu st08 Load Tray 2 or an optional 500 sheet tray

4.
Load the paper into the tray. Make sure that the stack is flat at all four corners and that the top of the stack is below the maximum-height indicators.
HP Laserjet P4010 P4510 note Load Tray 2 or an optional 500 sheet tray NOTE:

For information about loading paper that requires a specific orientation, see Paper orientation for loading trays.

HP Laserjet P4010 P4510 ztu st09 Load Tray 2 or an optional 500 sheet tray

5.
Slide the tray completely into the product.

HP Laserjet P4010 P4510 ztu st12 Load Tray 2 or an optional 500 sheet tray

HP Laserjet P4010 P4510 Load Tray 2 or an optional 500-sheet tray