Use Microsoft Windows commands to upgrade the firmware

Use Microsoft Windows commands to upgrade the firmware

To update the firmware by using a network connection, follow these instructions.

1.
Click Start, click Run, and then type cmd to open the command window.
2.
Type the following: copy /B FILENAME> \COMPUTERNAME>SHARENAME>, where <FILENAME> is the name of the .RFU file (including the path), <COMPUTERNAME> is the name of the computer from which the product is being shared, and <SHARENAME> is the product share name. For example: C:>copy /b C:LJP4015.RFU \YOUR_SERVERYOUR_COMPUTER.
HP Laserjet P4010 P4510 note Use Microsoft Windows commands to upgrade the firmware NOTE:

If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type: C:>copy /b “C:MY DOCUMENTSLJP4015.RFU” \YOUR_SERVERYOUR_COMPUTER.

3.
Press Enter on the keyboard. The control panel shows a message that indicates the progress of the firmware upgrade. At the end of the upgrade process, the control panel shows the Ready message. The message One File Copied appears on the computer screen.
HP Laserjet P4010 P4510 Use Microsoft Windows commands to upgrade the firmware