Use HP Web Jetadmin to upgrade the firmware
This procedure requires that you install HP Web Jetadmin Version 7.0 or later on your computer. See Use HP Web Jetadmin software. Complete the following steps to update a single product through HP Web Jetadmin after downloading the .RFU file from the HP Web site.
| 1.
|
|
| 2.
|
| Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to the Device Lists folder.
|
|
| 3.
|
| Expand the Device Lists folder and select All Devices. Locate the product in the list of devices, and then click to select it.
|
If you need to upgrade the firmware for products, select all of them by pressing the Ctrl key as you click the name of each product.
|
| 4.
|
| Locate the drop-down box for Device Tools in the upper-right corner of the window. Select Update Printer Firmware from the action list.
|
|
| 5.
|
| If the name of the .RFU file is not listed in the All Available Images box, click Browse in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you downloaded from the Web at the start of this procedure. If the filename is listed, select it.
|
|
| 6.
|
| Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. After the upload is complete, the browser window refreshes.
|
|
| 7.
|
| Select the .RFU file from the Printer Firmware Update drop-down menu.
|
|
| 8.
|
| Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the product. The control panel shows messages that indicate the progress of the upgrade. At the end of the upgrade process, the control panel shows the Ready message.
|
|
HP Laserjet P4010 P4510 Use HP Web Jetadmin to upgrade the firmware