Use FTP to upload the firmware through a browser

Use FTP to upload the firmware through a browser

HP Laserjet P4010 P4510 note Use FTP to upload the firmware through a browser NOTE:

The firmware update involves a change in the format of nonvolatile random-access memory (NVRAM). Any menu settings that are changed from the default settings might return to default settings and must be changed again if you want settings that are different from the defaults.

1.
Make sure the Internet browser you are using is configured for viewing folders from FTP sites. These instructions are for Microsoft Internet Explorer.
a.
Open the browser and click Tools, and then click Internet Options.
b.
Click the Advanced tab.
c.
Select the box labeled Enable folder view for FTP sites.
d.
Click OK.
2.
Print a configuration page and note the TCP/IP address shown on the EIO Jetdirect page.
3.
Open a browser window.
4.
In the address line of the browser, type ftp://<ADDRESS>, where <ADDRESS> is the address of the product. For example, if the TCP/IP address is 192.168.0.90, type ftp://192.168.0.90.
5.
Locate the downloaded .RFU file for the product.
6.
Drag and drop the .RFU file onto the PORT1 icon in the browser window.
HP Laserjet P4010 P4510 note Use FTP to upload the firmware through a browser NOTE:

The product turns off and then on automatically to activate the update. When the update process is complete, a Ready message displays on the product control panel.

HP Laserjet P4010 P4510 Use FTP to upload the firmware through a browser