Install an HP Jetdirect print server card

Install an HP Jetdirect print server card

1.
Turn off the product.
2.
Remove the two screws and cover plate from the EIO slot on the back of the product.

HP Laserjet P4010 P4510 ztu pp14 Install an HP Jetdirect print server card

HP Laserjet P4010 P4510 note Install an HP Jetdirect print server card NOTE:

Do not discard the screws or the cover plate. Save them for future use if you remove the EIO card.

3.
Install the EIO card in the EIO slot and tighten the screws.

HP Laserjet P4010 P4510 ztu pp15 Install an HP Jetdirect print server card

4.
Connect the network cable to the EIO card.

HP Laserjet P4010 P4510 ztu pp16 Install an HP Jetdirect print server card

5.
Turn on the product, and then print a configuration page to verify that the new EIO device is recognized. See Print the information and show-me-how pages.
HP Laserjet P4010 P4510 note Install an HP Jetdirect print server card NOTE:

When you print a configuration page, an HP Jetdirect configuration page that contains network configuration and status information also prints.

HP Laserjet P4010 P4510 Install an HP Jetdirect print server card