Check DIMM installation
After installing the DIMM, make sure that the installation was successful.
| 1.
|
| Turn the product on. Check that the Ready light is illuminated after the product has gone through the startup sequence. If an error message appears, a DIMM might have been incorrectly installed. See Interpret control-panel messages.
|
|
| 2.
|
|
| 3.
|
| Check the memory section on the configuration page and compare it to the configuration page that was printed before the memory installation. If the amount of memory has not increased, the DIMM might not be installed correctly, or the DIMM might be defective. Repeat the installation procedure. If necessary, install a different DIMM.
|
|
| NOTE:
|
If you installed a product language (personality), check the “Installed Personalities and Options” section on the configuration page. This area should list the new product language.
|
HP Laserjet P4010 P4510 Check DIMM installation