Link speed and duplex settings

Link speed and duplex settings

The link speed and communication mode of the print server must match the network. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel.

HP Laserjet P4010 P4510 note Link speed and duplex settings NOTE:

Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle.

1.
Press Menu HP Laserjet P4010 P4510 menu Link speed and duplex settings.
2.
Press the down arrow HP Laserjet P4010 P4510 arrow down Link speed and duplex settings to highlight CONFIGURE DEVICE, and then press OK.
3.
Press the down arrow HP Laserjet P4010 P4510 arrow down Link speed and duplex settings to highlight I/O, and then press OK.
4.
Press the down arrow HP Laserjet P4010 P4510 arrow down Link speed and duplex settings to highlight EMBEDDED JETDIRECT, and then press OK.
5.
Press the down arrow HP Laserjet P4010 P4510 arrow down Link speed and duplex settings to highlight LINK SPEED, and then press OK.
6.
Press the down arrow HP Laserjet P4010 P4510 arrow down Link speed and duplex settings to highlight one of the following options.


Setting
Description
Auto
The print server automatically configures itself for the highest link speed and communication mode allowed on the network.
10T HALF
10 megabytes per second (Mbps), half-duplex operation
10T FULL
10 Mbps, full-duplex operation
100TX HALF
100 Mbps, half-duplex operation
100TX FULL
100 Mbps, full-duplex operation
100TX AUTO
Limits auto-negotiation to a maximum link speed of 100 Mbps
1000TX FULL
1000 Mbps, full-duplex operation
7.
Press OK. The product turns off and then on.
HP Laserjet P4010 P4510 Link speed and duplex settings