Electrical specifications

Electrical specifications

HP Laserjet P4010 P4510 warning Electrical specifications WARNING!

Power requirements are based on the country/region where the product is sold. Do not convert operating voltages. This can damage the product and void the product warranty.


Power requirements
Specification
110-volt models
220-volt models
Power requirements
100 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current
10.7 Amps
5.7 Amps


Power consumption (average, in watts)
Product model
Printing
Ready
Sleep
Off
HP LaserJet P4014 models
800 W
18 W
13 W
Less than 0.1 W
HP LaserJet P4015 models
840 W
18 W
13 W
Less than 0.1 W
HP LaserJet P4515 models
910 W
20 W
13 W
Less than 0.1 W

1 Values subject to change. See www.hp.com/support/hpljp4010series or www.hp.com/support/hpljp4510series for current information.

2 Power numbers are the highest values measured using all standard voltages.

3 Default time from Ready mode to Sleep = 30 minutes.

4 Heat dissipation in Ready mode = 70 BTU/hour.

5 Recovery time from Sleep to start of printing = less than 15 seconds.

6 HP LaserJet P4014 speed is 45 ppm Letter size. HP LaserJet P4015 speed is 52 ppm Letter size. HP LaserJet P4515 speed is 62 ppm Letter size.

HP Laserjet P4010 P4510 Electrical specifications